Since we are setup nicely in Greenspot the flying activity has increased significantly. Such there is now almost always somebody that enjoys our new site. This is not only great for our club but also good for our field's safety because there are fewer times when our field in unattended.

This picture was taken during the week by Rick Inlow. It shows Woody's big IMAC plane just before landing.

We had a great turnout on our first semi-official gathering at our new flying site and the sky over Greenspot was populated with models from dawn to dusk. It was a lot of relaxed fun and everybody enjoyed the new field, the views (before the SMOG layer finally caught up with Highland in the late afternoon), the vast open flying area, and of course our new shades

The picture on the left shows the busy ready and setup area.

This last weekend was indeed a "work weekend"! We had almost 25% of our members coming out on either Saturday or Sunday to help with the final push of our runway. Thanks to everybody who helped over the weekend, you guys did an awesome job and you can be truly proud of what you did. - There are not many clubs that would build such a runway completely on their own. We worked all day on both days and finished the markings just about the time when it got dark. Dean Daily and Oscar on the picture on the left are obviously pleased and happy with the result.

The new Greenspot site is active as of today (Monday Nov. 17) and the old runway should not be used anymore. The only items that are currently still at the old site are the two setup tables, however they will be moved soon too.

Once again: Great Job!!!

Got Shade! - Since last weekend we have again a nice permanent shade structure at our new field location in Greenspot. The shade is D.J.'s old shade (60x12' steel frame and aluminum roof) plus two 20' extensions left and right that will be covered with fabric early next year.

The shade went up much quickier than we originally thought, so that we were done after only one day. Plus if you haven't noticed, we were just about done with the setup before the first rain of the season. Thanks a lot to Roger, Dennis, Don, and Andreas for their setup up work!

For the last couple of weeks we have been working hard on our new site in Greenspot. Just last weekend we finished surveying the perimeter and grading the area where our new field will be situated. - It is looking very, very, very good - You will have to come out for yourself to check.

Many members have helped in various ways, a special thank goes however to Dennis Driskill and his son David who did all the heavy grading. Thanks also to Larry Jacinto from Mentone for their great support. - Thanks a lot to everyone who has helped!

Another great Pylon Race! We had again a awesome racing day with nine participants from three local clubs (Gilman, AMAA, and MARKS). The ambiance was very relaxed and friendly, like always and the weather, although on the cloudier side, cooperated perfectly. - Just look at those smiling faces on the picture!

This snapshot shows the racers of the Golden Race. From right to left (1st - 4th): Don, Holly, Andreas, and Mel.

What a great race day on a wonderful Sunday! - We had seven racers that came from the AMAA, Gilman Springs, and MARKS RC clubs competing in our World Model Races. For a detailed report you will have to wait for the upcoming newsletter, but we witnessed some great races, close but accident-free flying and some great airborne camaraderie.

The picture on the left shows the race crew, before the race. Holly Hollingworth (1st), Chris Gaultier (2nd), and Tom Widmer (3rd) took top honors. - Congrats!!! - Thanks also to the members and affiliates that helped organize the race (Joe Augino, Erik and Sven Blaser, Rick Inlow, Jim Levell, and Brian Ahrens).

This Labor Day weekend we set out to fix the runway with sand and polymer that was left over from this spring's GRIP project. We had done a test earlier that week and we were surprised how easy it was. You can see the helping crew and the result on the photo to the side.

The restoration was done by lunch and the polymer started to set in the afternoon; by the following day everything had cured. For the final touch we did also reapply the markings on the runway and the newly fixed taxiways.

Special thanks go to Harry Hill (President AMAA) of Redlands - Yucaipa Rentals for letting us use their equipment for compacting. Thanks a lot!

Our newest members Andrew and Liam Glendening preparing one of their airplanes for its first takeoff at Greenspot. The plane had been suspended in the hangar (aka garage) for more than four years, however, both plane and pilot did well and a couple of great flight were performed. This proves again that once you are bitten by the RC model bug you can pick it up at any time even after a longer break.

Back from my vacation I was checking out our field when I say that there was a nice new wooden setup table! - Now we have three setup tables should make it easier to get our models ready without hauling too much equipment back and forth.

The next time you see Art Doud at the field don't forget to thank him for building that nice table! - Great job Art, thanks a lot!!!

As announced at one of the last meetings, if you build another table (we need a total of about seven) then you get a one year membership for free!
(abl, 8/12/08)

Last week we have moved our new container to Greenspot - this week we did the same with DJ's old shade structure that was stored for many years at Rondy's Glass in San Bernardino (Thanks!). Like the previous operations the transfer went smooth and quick. We were hauling everything with Rick's 16' trailer and got a lot of help from members that were enjoying the perfect Sunday flying weather. - Thanks guys.
(abl, 6/29/08)

We had picked the hottest weekend so far to move our new 24' container from Yucaipa to Greenspot. Fortunately we started the move early and got the container positioned for the upcoming setup of the shade structure before it got really, really hot.

The picture on the left shows the container move crew: Erik, Sven, Glen, Andreas, Rick and our youngest helper Savannah. In the back you can see the big rig that Mazzulla Grading Inc. allowed us to use for the job - THANKS!!! - (abl, 6/21/08)

On Saturday Steven, Rick, Sven, and I added some color to our new field. Besides the all important centerline and two big Xs at the end, we added a runway outline and some marks for fun games and precision landings to the center section. -

The picture on the left shows the runway with the markings from West to East - Looks pretty cool, right?
(abl, 6/9/08)

Only one word can describe last Saturday:

With the help of many club members (I counted about 25) we pulled the project off and have now once again a nice, big, smooth runway. - Although we will have to apply a final sealing coat in 30 days, we are again back in business and the runway is open for all flying.
Thanks for everybody that pitched in and to all the businesses that were kind enough to let us use their heavy equipment! (Larry Jacinto, Nicholas Equipment Inc. (Mazzulla Grading), and Robertson's Concrete)

We did it! - After a successful dry-run of our polymer spreading device, some serious clean-up of our runway, and moving lots of earth (Thanks Dennis, Larry Jacinto and Mazzulla Grading for equipment and Robertson's Concrete for water!) we are ready for the real resurfacing date on April 26th. - If you see any of these fine members (including Chuck who was just out getting lunch for the crew) at the flying field don't forget to pat them on their back and thank them for turning our field back into a great site! (4-13-08)

Operation "Weed Crusher" on Saturday morning was a great success: Armed with shovels, picks, and weed whackers we had the field cleaned in no time. This was also the first step for getting the runway resurfaced.

The picture shows the entire crew after a good day's work.

Oscar attended last weekends Chino Flier Swap Meet & Piper Cup Festival. Here is an impression of the action on that day.

Steven has now two Forumula models in flying condition. They are made by Model Tech are 3D capable and Steven installed an OS FX .61 in one and a Saito 82 4-Stroke in the other model. Both are controled by an Airtronics VG 6000 radio. (3-25-08)